Development of a new collapsing ring bridge rail system. Paper prepared for the 54th Annual Meeting of the Transportation Research Board TRB, Washington, D.C., January 1975.

Author(s)
Kimball, C.E. Bronstad, M.E. Michie, J.D. Wentworth, J.A. & Viner, J.G.
Year
Abstract

An energy-absorbing bridge rail system that uses the plastic deformation of steel rings as the primary impact energy absorber has been developed through full-scale crash testing and the use of the BARRIER VII computer program. The system design not only is capable of withstanding impacts by large vehicles such as buses and trucks but also does not impact high accelerations to impacting smaller vehicles. Ten full-scale crash tests were performed with vehicles ranging from 2,000 to 40,000 lb (907 to 18,144 kg). Redirection of high-speed (55 mph (89 km/h)), 40,000-lb (18,144-kg) vehicles (articulated and non-articulated) impacting at a 19-deg angle was demonstrated. No significant elastic rebound of the rails and energy-absorbing rings was evident during test. Vehicle damage was limited to mostly sheet metal damage of the impacting front quadrant and side panels with limited suspension damage at the same quadrant. Bridge rail damage ranged from slight for the subcompact vehicle impact to extreme for heavy vehicle impacts. Tests were documented by strain gauge, vehicle accelerometer, and high-speed movie data as well as permanent deformation measurements. /Author/

Request publication

8 + 3 =
Solve this simple math problem and enter the result. E.g. for 1+3, enter 4.

Publication

Library number
B 6365 /85/
Source

San Antonio, Southwest Research Institute, 1975, 23 p., fig., graph., tab., ref.

Our collection

This publication is one of our other publications, and part of our extensive collection of road safety literature, that also includes the SWOV publications.