Real-time vehicle re-identification system for freeway performance measurements. Thesis University of California at Irvine.

Author(s)
Jeng, S.-T.
Year
Abstract

Traffic operations field computational resources as well as the bandwidth of field communication links are often quite limited. Accordingly, for real-time implementation of Advanced Transportation Management and Information Systems (ATMIS) strategies, such as vehicle re-identification, there is strong interest in development of field-based techniques and models that can perform satisfactorily while minimizing field computational and communication requirements. The ILD (Inductive Loop Detector)-based Vehicle ReIDentification system (ILD-VReID) is an example of a currently applied approach. Although ILDs are not without limitations as a traffic sensor, they are widely used for historical reasons and the sunken investment in the large installed base makes their use in this research highly cost-effective. Therefore, this dissertation develops a new vehicle re-identification algorithm, RTREID-2, for real-time implementation by adopting a PSR (Piecewise Slope Rate) approach that extracts features from raw vehicle signature data. The results of cases studies indicate that RTREID-2 is capable of accurately providing individual vehicle tracking information and performance measurements such as travel time and speed. The potential contributions of RTREID-2 are: application to square and round single loop configurations, and reduced computational requirements associated with re-estimation or transferability of the speed models used in the previously developed approach. As a consequence RTREID-2 is obviated for site-specific calibration and transferability issues. A freeway corridor study also demonstrates that RTREID-2 has the potential to be implemented successfully in a congested freeway corridor, utilizing data obtained from both homogenous and heterogeneous loop detection systems. A real-time vehicle classification model, which is based on the PSR approach, was also developed on the part of RTREID-2. The classification model can successfully classify vehicles into 15 classes using single loop detector data without any axle explicit information. The initial results also suggest the potential for transferability of the vehicle classification approach and are very encouraging. To investigate real-time freeway performance measurement in a real-world setting, the design of RTPMS (Real-time Traffic Performance Measurement System) that is based on RTREID-2 is also presented in this dissertation. A simulation of RTPMS is conducted to evaluate its feasibility. The simulation results demonstrate the potential of implementing RTPMS in real world application. (Author/publisher)

Request publication

3 + 1 =
Solve this simple math problem and enter the result. E.g. for 1+3, enter 4.

Publication

Library number
20070910 ST [electronic version only]
Source

Irvine, CA, University of California at Irvine, Institute of Transportation Studies ITS, 2007, XX + 176 p., 56 ref.

Our collection

This publication is one of our other publications, and part of our extensive collection of road safety literature, that also includes the SWOV publications.