Heavy-duty diesel vehicles contribute a substantial fraction of nitrogen oxides and particulate matter to the on-road vehicle emission inventory. The objectives of this study are to estimate roadway link-based emission rates for heavy-duty trucks for use in emission inventory estimation, and to quantify the impact of factors affecting truck emissions. A speed-acceleration modal emissions approach is developed from a database gathered via a portable emissions measurement system for single rear axle and tandem dump trucks. Second-by-second real-world truck speed profiles on links are analyzed based on observed patterns of time distributions of speed-acceleration modes. Link-based emission rates are estimated as the product of the fraction of time spent in each mode and the corresponding modal average emission rate. The sensitivity of link-based emission rates to key factors including chassis type, vehicle load and fuel type is presented. Single rear axle trucks have lower emission rates than tandems for CO2, PM, NO and HC, but higher CO emission rates. Loaded trucks have higher fuel use and emissions than unloaded trucks. Replacing diesel fuel with biodiesel fuel for heavy-duty trucks may reduce tailpipe NO exhaust emissions and will reduce emissions of PM, CO and HC. However, both fuels generate similar CO2 emissions. Benchmark comparisons for link-based emission rates show that NO emission rates increase with mean speed. However, link-based CO and HC emission rates were not as sensitive to speed variation as NO emissions. The link-based emission rates approach is recommended to couple heavy-duty vehicle emission inventory estimation with transportation demand models.
Samenvatting