The present report describes the results from two studies about methods for mobile assessment or estimation of road marking friction. In the first study, three different mobile methods, Road Friction Tester (RFT), Traction Watcher One (TWO) and Road Marking Tester (RMT), were compared to the handheld method Portable Friction Tester (PFT). In the second study, a prediction model for friction in higher speeds was developed, based on measurements of the coefficient of retroreflected luminance and the texture of the road marking. The first study showed that the different methods give different results, which is expected since the physical quantity coefficient of friction does not have a unique definition but is dependent on the properties of the instrument. TWO gave lower friction values than the other methods. Measurement speed had an influence on the results obtained with RFT and TWO. In the second study, TWO was used as a reference when developing a prediction model for friction in higher speeds. The results showed that friction to some extent can be predicted from the coefficient of retroreflected luminance and the texture of the marking, but that the relationship is not strong enough for the model to be applicable. A limitation of the study is that there is no standardized method for measurement of road marking friction in higher speeds available. The reference method used, TWO, is developed for friction assessment of road surfaces and not for road markings, which implies that the ability of the instrument to assess road marking friction is somewhat uncertain. (Author/publisher)
Samenvatting