A diesel engine was converted to dual-fuel hydrogen operation, ignition being started by a 'pilot' quantity of diesel fuel but with 65 to 90% of the energy being supplied as hydrogen. With later injection timing, use of delayed port admission of the gas, and a modified combustion chamber, thermal efficiencies were achieved nearly 15% greater than those for diesel as the sole fuel. A 'solid' water injection technique was used to curb knock under full load conditions when the power output equalled or exceeded that of a similar diesel engine. The indicator diagrams under these conditions closely approachthose of the Otto cycle. The development was assisted by computer simulation using a novel self-ignition and flame propagation model. The very fast burning rates obtained with stoichiometric hydrogen-airmixtures show combustion to occur within 5 degrees of crank rotation yet Otto cycle thermal efficiency was not achieved. However, greenhouse gases are shown to be reduced by more than 80%, nitrogen oxides by up to 70%, and exhaust smoke by nearly 80%. (A)
Samenvatting